If you’ve ever stood in a warehouse, staring at a 1-ton bulk bag (also called a FIBC, flexible intermediate bulk container) and a stack of liners, you know the confusion that comes with picking the right size. As a FIBC liners supplier who’s fielded this question a dozen times a week for the last 12 years, I can tell you it’s not just about grabbing a liner that “looks close.” Get it wrong, and you’re dealing with liners that tear mid-fill, leave 200 pounds of product spilling out, or waste money on liners that are way too big and flimsy. Today, we’re breaking down exactly what size FIBC liner fits a 1-ton bag, no guesswork required. Fibc Liners

First, let’s start with the basics: what a 1-ton FIBC actually is. A standard 1-ton bulk bag isn’t a one-size-fits-all. Most 1-ton FIBCs measure 35 inches wide, 48 inches tall, and 18 inches in depth when empty—those are the common dimensions for the circular or square bags most farmers, food processors, and construction workers use. But some specialty 1-ton bags, like those for ultra-fine powders, are a bit slimmer (32 inches wide, 50 inches tall) or shorter (30 inches tall). That’s why the first rule isn’t “just match the liner to the bag’s dimensions” — it’s measure your empty bag before you order anything. Too many customers skip this step and end up with a liner that’s too narrow to slide into the bag, or too short to reach the bottom of the spout.
Now, the liner itself: FIBC liners are designed to fit a specific “load volume” of your product, not just the empty bag’s size. A 1-ton bag holds roughly 50 cubic feet of product when it’s filled to capacity (that’s accounting for the small air gap at the top that lets you tie or seal the bag). A liner has to stretch enough to fit that volume without being so tight that it tears when you’re dumping in 2,000 pounds of fertilizer, plastic pellets, or flour. Most reputable liners manufacturers size their products by both the bag’s outer dimensions and the maximum fill weight. For a standard 1-ton bag, that translates to a liner with a length of 54 inches, a width of 40 inches, and a depth of 20 inches. Wait, that’s bigger than the empty bag itself—here’s why.
When you slide a liner into a FIBC, you have to leave a few extra inches at the top to fold over the bag’s edges and seal the opening. That’s called the “headroom,” and for a 1-ton bag, you need about 6 extra inches of liner length beyond the bag’s height. The width and depth are a bit more flexible, but you want the liner to be slightly larger than the bag’s inner dimensions so it doesn’t stick to the sides when you’re filling dense product. If the liner is exactly the same size as the bag, the friction between the liner and the bag’s material will make it hard to fill quickly—especially with heavy materials like gravel or resin pellets. A little extra space also prevents the liner from stretching too thin as you fill it, which is a top cause of liner tears.
But let’s talk about exceptions, because not all 1-ton bags are the same. If you’re using a circular 1-ton FIBC (common for shipping grains or sugar), the inner circumference is about 110 inches. A circular liner needs to match that circumference to fit, so you’d calculate the diameter: circumference divided by pi (3.14) is roughly 35 inches, same as the bag’s diameter. For a circular liner, you’ll want a length of 54 inches as well, to get that 6 inches of headroom at the top. That’s a quick fix for anyone with round bags—no need for complicated math, just match the circumference and add 6 inches to the length.
Another big factor: the product you’re filling. If you’re handling a light, fluffy product like wood chips or rice bran, you can get away with a liner that’s just 10% larger than the bag’s dimensions. Fluffy materials expand a bit when poured, but they don’t exert a lot of pressure on the liner. If you’re dealing with a dense, abrasive product like silica sand or metal powder, you need a liner that’s 20% larger. Abrasive materials rub against the liner as it’s filled, so a little extra space reduces friction and prevents holes. We’ve had customers in the construction industry tell us they used to get 10 uses out of their liners until they started sizing up for abrasive materials—now they get 25 uses, saving them hundreds of dollars a month.
What happens if you pick the wrong size? Let’s say you buy a liner that’s too small. You’ll spend 10 minutes fighting to stuff it into the 1-ton bag, and by the time you get it in, the top of the liner is too short to fold over the bag’s spout. That means you can’t seal the bag properly, and when you lift it with a forklift, the liner might slip out, spilling your 1-ton load all over the warehouse. We had a customer last year who ordered a 40-inch wide liner for a 35-inch wide bag, and when he tried to fill it with salt, the liner stretched so thin over the corners that it tore, spilling 1,800 pounds of salt onto his loading dock. He had to call us the next day, embarrassed, and order the correct size—we still laughed about it at the trade show that spring.
If you pick a liner that’s too big, the problems are different. A liner that’s 30% larger than the bag will bunch up at the bottom, creating extra space for product to shift. That can cause the bag to tip when you lift it, or make the liner wrap around the spout, blocking the fill point. We once had a customer who ordered a liner that was 12 inches too long because he thought “bigger is safer”—he ended up with a liner that folded over itself at the top, so when he sealed the bag, part of the liner was stuck inside the spout, and when he tried to unload the product, it got stuck halfway, costing him an hour of downtime.
Let’s get practical: if you’re measuring your 1-ton bag right now, here’s a step-by-step guide. First, measure the empty bag’s height, from the base to the top of the spout. Add 6 inches to that number for headroom—that’s your liner length. Next, measure the bag’s inner width (if it’s square) or circumference (if it’s circular). For square bags, add 5 inches to that measurement to give the liner room to stretch. For circular bags, add 4 inches to the circumference. The depth is just the bag’s inner depth, no extra needed—liners are flexible enough to fit.
Wait, what about liners with different openings? Some 1-ton bags have top spouts, others have side spouts, and some are open-top with a flap. If you have a side spout, you’ll want to add 2 extra inches to the liner’s length to make sure the spout lines up correctly, so you don’t have to stretch the liner to connect it to the bag. That’s a small detail, but it saves a lot of time when you’re filling multiple bags a day.
As a supplier, we don’t just sell liners—we test them. Every batch of liners we carry is made from either 3-mil (for light products) or 6-mil (for heavy, abrasive products) polyethylene, and we size them specifically to fit the most common 1-ton FIBCs. Our standard liner for a 1-ton square bag is 40 inches wide, 54 inches long, 20 inches deep, and for circular bags, it’s a 39-inch diameter, 54-inch length. We’ve designed these sizes based on 10 years of feedback from customers in agriculture, food, construction, and manufacturing, so they’re not just random numbers.
One thing I wish more people knew: there’s no “one liner for all 1-ton bags” even if the weight is the same. A 1-ton bag for coffee beans is way different than a 1-ton bag for iron ore, so their liners need to be different too. If you’re handling food-grade products, you might need a liner that’s slightly larger to accommodate the odor-blocking or food-safe properties. If you’re handling hazardous materials, you’ll need a liner that’s puncture-resistant and fits a bit looser to prevent static buildup.
I always tell new customers: if you’re not sure, send me a photo of your empty 1-ton bag and tell me what product you’re filling, and I’ll tell you the exact size. We don’t charge extra for that advice—we’d rather you get the right liner the first time than have to deal with returns or messes. Last month, a small farm supplier came to us confused because he’d been ordering liners that were too small for his grain bags, and after we measured his bags, we pointed him to our 54-inch length liner instead of the 48-inch he’d been buying. He saved $150 a month in liner costs and stopped having to clean up spilled grain after every fill.
If you’re still wondering, here’s a quick recap: for a standard 1-ton square FIBC (35”W x 48”H x 18”D), go for a 40”W x 54”L x 20”D liner. For a standard 1-ton circular FIBC (35” diameter, 48”H), go for a 39” diameter x 54”L liner. For dense, abrasive products, add 2-3 inches to the width or circumference. For light, fluffy products, you can stick to the standard size.

At the end of the day, the right liner size isn’t just about fit—it’s about saving you time, money, and hassle. A liner that fits correctly will last longer, prevent spills, and make your filling process faster. If you’re ready to order the right FIBC liner for your 1-ton bag, or if you have questions about sizing for your specific product, reach out to us to discuss your needs. We’re here to help you get it right, no guesswork required.
Standard Bags References
- Flexible Intermediate Bulk Containers (FIBC): Design and Performance Requirements, International Organization for Standardization (ISO), 2018
- Polyethylene Liner Sizing for Bulk Packaging, Packaging Association of North America, 2020
- Bulk Bag Handling Best Practices, Material Handling Industry (MHI), 2021
Hebei Hesheng Plastic Products Co., Ltd.
Hebei Hesheng Plastic Products Co., Ltd. is one of the most professional fibc liners manufacturers and suppliers in China for over 30 years, specialized in providing the best customized service. We warmly welcome you to wholesale high quality fibc liners for sale here from our factory. For price consultation, contact us.
Address: Tasizhuang Industral Zone, Qing County, Cangzhou City, Hebei, China.
E-mail: office@heshengbulkbag.com
WebSite: https://www.hs-bulkbags.com/